What are the solutions to automobile oil pipe blockage:
1, if there is air in the pipeline, after applying the brakes, the air in the oil line will be compressed, making the brakes softer, the ineffective stroke increases, and the braking force decreases significantly, which is very dangerous;
2, so when replacing brake fluid most mechanics will use more than two bottles of brake fluid, mainly to vent the pipeline;
3, when stepping on the brakes, the brake master cylinder topped the brake fluid in the reservoir jug to the sub-pumps of each wheel, when the system with the problem, when stepping on the brakes, the pipeline will form a section of the vacuum, resulting in soft brakes, and this vacuum is also formed in the air.
Automobile oil pipe
Consequences of a plugged automotive oil return line OE No. 95510606100: In severe cases, it can affect starting because it is compression-ignition, and if the air-fuel ratio is not well controlled when injecting the fuel, it will. But in general it is possible to start, just black smoke. When the gasoline pump is working, if the return pipe is clogged it will increase the oil pressure in the pipe between the gasoline pump and the carburetor accordingly, therefore, in order to balance the pressure of the carburetor inlet needle valve.
Prevent dirt clogging: do not remove the filter on the fuel tank cap, the bottom of the fuel tank oil drain screw plug is generally magnetic, can be adsorbed in the tank of ferrous dirt, do not casually replaced, to be regularly cleaned; do not use unclean oil, pipeline filter to be regularly cleaned; stop icing clogging: according to the seasonal conditions of the use of oil, to prevent ice, to prevent the pipe from collapsing and clogging, and often rationalize the oil pipe, to prevent folding or squeezing caused by clogging. The oil pipe is often straightened out to prevent it from being folded or squeezed, resulting in clogging.
The above is about the car oil pipe clogging solution, I hope this article is helpful to you.