Automobile oil pipe semi-closed full-active ultrasonic cleaning machine
Cleaning target: small mechanical parts automotive industry, air conditioning compressor industry parts cleaning
Process flow: loading → water washing (swing) → alkali washing (swing) → ultrasonic cleaning (swing) → rinsing (swing) → down the material
Equipment Overview: PLC control, mechanical arm drive, adjustable cleaning beat (0 ~ 9999S), cleaning part of the open layout, both active batch cleaning, can also be manually a few cleaning. Each slot has a separate cycle of filtration to ensure the cleanliness of the cleaning fluid, and then useful to save the cost of cleaning. The cleaning equipment consists of frame, cleaning tank, ultrasonic system, robotic arm system, circulating filtration system, active heating temperature control system, active liquid control system, electrical active control system, maintenance alarm system and other components.
High-pressure hose use: oil industry high-pressure hose manufacturing process: high-pressure hose classification high-pressure hose damage causes
(1) high-pressure hose wall of the inner and outer layers of oil-resistant rubber, the center of the (2 to 4) interspersed woven steel wire or steel wire around. Poor quality of the hose will present: uneven thickness of the hose wall; steel wire weaving too tight, too loose or too few layers of steel wire; hose deformation (elongation, shortening or bending deformation) is greater; outer rubber airtightness caused by poor steel wire corrosion; poor sealing of the inner rubber so that high-pressure oil can easily enter the steel wire layer; the rubber layer and the steel wire layer adhesion is lacking. All of the above will make the hose ground bearing capacity decline, ending in the thin wall of the pipe burst.
(2) hose and joints when installing the amount of buckling and buckling speed selection is not appropriate, or the layout of the joints and, raw materials, scale selection is unreasonable, can lead to hose and joints pressed too tightly or too loosely, the formation of joints at the early damage.